AUDAC AMP523MK2, Руководство пользователя

Страница: 12 / 32

12
All the control and configuration ports are located on the rear panel of the AMP523MK2,
including the 24 Volts power connection.
1) 24 Volts power connector:
The 24 Volts power supply connection is provided on the left side of the AMP523 MK2’s
rear panel. The included power supply (PSD241) should be connected to the terminal
block connectors. Pay attention to the polarity when connecting the power supply.
2) Run LED:
This LED shows the operation mode of the device. When the device is
running in normal mode, this LED will blink at a constant frequency.
3) RS485 + audio RJ45 connector:
An additional wall panel controller (MWX45) and Wall Line or Wall Microphone input
(WMI and WLI units) can be connected to this input. This way, the volume and the
signal routing can be adjusted by means of a wall panel and additional local Line and
Microphone inputs can be connected.
4) RS232 control port:
With this connector, the AMP523MK2 can be connected to external control hardware
using RS232. This makes it possible to control the AMP523MK2 by means of an home
automation system.
5) Ethernet connection:
The AMP523MK2 can be connected to an Ethernet network with this RJ45 connector.
This makes it possible to control the AMP523MK2 functions over ethernet, by simply
using any device with a web browser such as computer, smartphone, ...
Rear panel