30
Saf
ety P
recautions
If the product is damaged because it is dropped or
something, and its display is cracked or internal parts
are exposed, do not touch the cracked display or
exposed parts with your hands. Doing so might cause
electric shock or injury from damaged parts.
If the wet product is charged, electric shock, short
circuit, or corrosion may occur and overheating may
cause fire or malfunction or burns.
Although this product model has waterproof property,
stop use if liquid such as water gets inside the product
from the external connection terminal cover, card slot
cover etc. Continued use of the product in this state
might cause overheating, fire or a fault.
Do not use the product while driving an automobile or
motorized bicycle, riding a bicycle or walking. It might
cause a traffic accident, turnover accident, or falls.
Use of a cell phone while driving a car or motorbike is
prohibited by law. Use of a cell phone while riding a
bicycle may be punishable by some regulations.
If charging is not completed after the specified
charging time, stop charging. Failure to do so might
cause leakage of liquid, overheating, rupture or ignition.
Do not leave in places within the reach of small
children. Small children might swallow small parts, etc.
by mistake and choke on them, or might drop them by
mistake and cause accidents or injury.
Do not cover or wrap the product with bedding, etc.
while using or charging the product. Doing so might
cause fire, fault or injury.
When using a charging equipment or external device,
insert/remove the connector straight to/from the
terminal. Make sure the orientation of the connector.
Unless it's correct, it may cause overheat, ignition,
damage or a fault.
$"65*0/
Be sure to read the following
cautions before use.
Do not expose the camera lens to direct sunlight
for an extended period. Doing so might cause
ignition, rupture, fire or a fault by the light-collecting
mechanism of the lens.
Do not store the product in places subject to direct
sunlight (e.g. in automobiles), places that get hot,
places that get extremely cold, and in humid or dusty
places. Doing so might cause overheating, fire,
deformation or a fault.
Do not place the product on rocky or tilting surfaces,
or do not charge the product in unstable places.
Dropping the product may cause injury or damage.
Pay careful attention while vibrator is set. Also, pay
sufficient attention to impact, etc. Doing so might
cause fault or injury.
the product may become hot by prolonged use or
connection to an external power source. Do not touch
the product or specified charging equipment for a
long time. Doing so might cause low-temperature
burns. In addition, do not cover or wrap the product
with a paper, cloth or bedding. Doing so might cause
fire, injury or a fault.
