- 8 -
Handling Precautions
These precautions are provided to prevent product faults and to ensure that performance
can be fully demonstrated. Thoroughly read these precautions to ensure correct use.
■
Precautions Common to the Main Unit, Internal Battery, Charger, Tablet Stand
(Sample), au IC Card (SIM Card), Peripheral Devices
●
Do not apply excessive force to the product during use.
Be sure not to put the product into a tightly packed bag or place a heavy object on the
product in a bag. Sitting on the product might damage the display or internal circuit board
resulting in a malfunction.
Keeping an external connection device connected to the charging terminal, external
connection terminal or earphone microphone terminal might damage the connector
resulting in a malfunction. Such damage and malfunction are not covered by the warranty,
even if there is no external damage.
●
To ensure the water resistance (equivalent to IPX5 and IPX8) or the dust resistance (IP6X)
of the product, use the product with the au IC card/microSD memory card tray tightly
closed.
Note that resistance is not guaranteed in every usage condition. Do not allow water to get
inside the product, or splash water on a specified charger (sold separately) or optional
accessories. Do not open/close the au IC card/microSD memory card tray in the rain or
with any water on the surface of the product. Doing so may cause water intrusion resulting
in internal corrosion.
Malfunctions determined to be caused by such water intrusion are not covered by the
warranty.
●
Do not use the below items in extremely hot, cold or humid places.
(Use within an ambient temperature range of 5
℃
to 35
℃
and humidity range of 35% to
90%. Temporary use at 36
℃
to 40
℃
is allowed.)
- Main unit
- au IC card (attached to the main unit)
●
Do not use the below items in extremely hot, cold or humid places.
(Use within an ambient temperature range of 5
℃
to 35
℃
and humidity range of 35% to
85%.)
- Charger
- Peripheral devices
●
Do not use in places subject to lots of dust or vibration.
Doing so may cause malfunction.
●
Clean the product's charging terminal, external connection terminal and earphone
microphone terminal with dry cotton swabs, etc. every now and then. Soiling may result in
a poor connection. Do not exert a strong force to clean each of the terminals to prevent
deformation.
●
Clean the product with a soft dry cloth (such as the type used for eyeglasses). Forceful
rubbing with a dry cloth may scratch the display. The display may be stained if splash or
smear is left attached to the surface. Wiping the product using thinner, benzine, detergent,
glass cleaner, etc. might erase the printing on the outer cover or cause malfunction.
●
A soft cloth may be dabbed with foaming hand soap, isopropyl alcohol, ethanol, or sodium
hypochlorite and used for wiping.
* For product care, refer to "Caring for the Product" (
▶
P. 13).
●
Use as far away as possible from land-line phones, TVs and radios. Use nearby might affect
them.
●
The product may become warm while charging or during other operations, depending on
the situation, but this is not abnormal.
●
Do not place near corrosive chemicals or in places where corrosive gas is generated.
Doing so may cause malfunction.
●
Do not use outside when you can hear thunder. Doing so might risk lightning strikes and
electric shock.
●
Be sure to use only the specified peripheral devices. Use of other peripheral devices might
cause malfunction.
●
Do not put the product in a cooking apparatus such as microwave oven or a pressure
vessel. Doing so may cause malfunction.
●
The customer is not allowed to disassemble, modify or repair the product. Doing so may
cause malfunction. Modification of the product is in violation of the Radio Law and
Telecommunications Business Law.
●
Do not allow any part of yourself (fingers, etc.) or conductive foreign objects (metal
fragments, pencil leads, etc.) to come into contact with or get inside the product's
charging terminal, external connection terminal or earphone microphone terminal to avoid
short-circuiting.
Doing so may cause malfunction.
●
In the event that the product gets wet while charging, immediately disconnect the power
plug of the specified charger (sold separately).
●
Do not use the product while driving a car or motorbike, riding a bicycle or walking. Use of
a tablet while driving a car or motorbike is prohibited by law. Use of a tablet while riding a
bicycle may be punishable by some regulations.
●
Using or charging the product in a bag or while it is covered with bedding might cause
malfunction.
●
When using a specified charger (sold separately) or external device, insert/remove the
connector straight to/from the terminal. Make sure the orientation of the connector.
Unless it's correct, it may cause a fault.
●
Do not expose the camera lens to direct sunlight for an extended period. Doing so may
cause malfunction.
●
Do not use, store, or leave the product in places subject to direct sunlight (e.g. in a car),
places that get hot, places that get extremely cold, and in humid or dusty places. Doing so
may cause malfunction.
●
Do not leave the product on unstable or sloping surfaces. Be careful especially when the
product is charging or set to vibrate. The product may fall and cause malfunction.
●
For charging the product, do not exceed the rating of an outlet or wiring device when
using a power bar, etc.
Содержание DIGNO Tab
Страница 23: ...22...
