pg. 9
Notes: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only.
Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time
.
All specifications are subject to change without prior notice.
© Copyright ATZ 2016
Model : ATZ VGA-EM100IR-RX
Description: HDMI4K/VGA over IP Receiver with IR, RS-232, PoE/ LAN &
USB/KVM Extension
sight of the IR Extender.
(11) IR OUT: Connect to the provided IR Blaster to transmit IR signals from the
associated Transmitter to devices within direct line-of-sight of the IR Blaster
(12)
ISP SEL: For Factory use only. By default this is set to the left (away
from the RS-232 port) and allows normal RS-232 functionality. Setting this switch
to the right enables ISP engineering mode.
(13)
RS-232: Connect directly to an RS-232 controllable device to receive commands
from the device connected to the Transmitter. The baud rate is configurable, but the
default baud rate is 115200.
Note: When the Transmitter is in multicast mode every connected Receiver unit
can send RS-232 commands to the Transmitter and commands sent from the
Transmitter side will be sent to all connected Receivers.