ATX UCrypt Скачать руководство пользователя страница 14

Страница: 14 / 84

CHAPTER 2: STATUS TAB

2-2

MDU Solutions

– UCrypt

Monitoring Server - Operation Manual

The list of added or monitored Devices depending on Display List Filter selection.

4. Monitoring Server licenced number of monitored Devices.

The number of currently monitored Gateways(UCrypt Cable Gateway) and Encoders is indicated along with the

licenced limit.

2 .3 Device Filter Panel

The Device Display Filter section, Figure 2-2, allows displaying filtered lists of remote UCrypt, DVIS and DigiVu Devices in

different formats based on their current status as well as starting the monitoring process, stopping the monitoring process and

other functions related to the monitored Devices.

2 .3 .1 Device List Filters

These buttons control which remote Devices are displayed on the Status Page. These are clickable filters, Figure 2-3, which

selectively display in the list, remote Devices based on their monitored status as described below. The colored indicator

associated with the filter (Grey, Green, Yellow, Red) indicates that the monitored Device with a corresponding indicator will be

displayed by clicking the appropriate filter selection.

• Show all

Shows all UCrypt Devices that have been added to the Monitoring Server.

• Show Inactive

Shows all remote Devices with a status indicator of

Grey

. These are Devices that have been monitored at least once

but are not currently being monitored.

• Show Active

Shows all remote Devices with a status indicator of

Green

. These are Devices that are being actively monitored and

have no unacknowledged Alerts.

• Show New Servers

Shows all remote Devices with a status indicator of

Yellow

. These are newly added Devices that have never had

monitoring started. These newly added devices will also have a background color of yellow to make them more easily

identifiable. Once monitoring has been started then stopped, the indicator for that machine will be grey.

• Show Errors/Warnings

Shows all remote Devices with a status indicator of

Red

. These are Devices that have current Alerts that have not

been acknowledged.

Server Display Filters

Figure 2-2: Monitored Device Filter Panel

Figure 2-3: Show Device Filters

Содержание UCrypt





















































































Результаты поиска

Содержание UCrypt

Отзывы:

Похожие инструкции для UCrypt

Бренды по названию

Популярные бренды

ATX UCrypt, Руководство по эксплуатации

Результаты поиска

Содержание UCrypt

Отзывы:

Похожие инструкции для UCrypt

Бренды по названию

Популярные бренды