ATX SignalOn Series, Руководство по установке и эксплуатации

Страница: 7 / 24

PREFACE
GENERAL
1. General
The SignalOn system is a modular system that permits high isolation combining, splitting, and amplification of headend
signals in a CATV system. The system is designed to accommodate strong cable management, EMI shielding, and ease of
use. This facilitates easy reconfiguration and high performance within a dynamic headend environment.
Each amplifier or power supply occupies two positions in a chassis. Up to nine amplifiers and one power supply, or eight
amplifiers and two load-sharing, redundant power supplies can be installed in a vertical 20-position SignalOn chassis. Ten
amplifiers may be installed in the vertical 20-position SignalOn chassis if an ex24 VDC power source is used.
Each amplifier or power supply occupies two positions in a chassis. Up to three amplifiers and one power supply, or two
amplifiers and two load-sharing, redundant power supplies can be installed in a horizontal 8-position SignalOn chassis. Four
amplifiers may be installed in the horizontal 8-position SignalOn chassis if an ex24 VDC power source is used.
1.1. Compatibility with SignalOn
®
Product Line
The SignalOn amplifiers and power supplies may be installed in the same chassis as the SignalOn Passive modules. They
are not physically compatible with the existing RF Worx
®
chassis.
SignalOn passive modules may be installed in MAXNET chassis, if mounting screws are replaced. Consult ATX technical
support for more info.
Refer to the SignalOn Chassis & Power Supply manual for more information.
SignalOn
®
Series – Forward Path Amplifier Products – Installation & Operation Manual
1-1
CHAPTER 1: GENERAL