CHAPTER 4: INSTALLATION
VersAtive
®
Pro, DigiVu
®
II, DigiStream – 1RU Hardware Interface Manual
4-5
4 .6 .3 Install the Outer Rails in the Rack
1. Attach the longer section of the outer rail to the outside of the shorter section of the outer rail, Figure 4-3. You must
align the pins with the slides. Both ends of the outer rail must face the same direction in order to be secured to the
rack.
2. Adjust both sections of the outer rail to the proper length so that the rail fi ts snugly within the rack, Figure 4-4.
3. Secure the longer section of the outer rail to the of the front rack rails with two 10-32 rack screws.
4. Secure the shorter section to the rear rack rails with two 10-32 rack screws.
5. Repeat steps 1-4 for the remaining outer rail.
Secure to rack front rails
Attach the 2 sections tegether
Secure to the rear rack support rails
1
Figure 4-3: Install Rail Sections
2
3
4
Figure 4-4: Install Outer Rails to Rack
