52
When A Router Is Used:
1) Setting the DVR with a Static IP:
- Internet Connection: You can connect the DVR to a router which is connected to a cable
modem or a router in a LAN environment.
2) Setting the DVR Network:
- Set the <Connection Mode> to <Static IP>.
- Check whether the set IP address is in the Static IP range provided by the IP router.
3) Make sure the Gateway address and Subnet Mask are equal to those set in the IP router.
4) Setting the DHCP IP Address of the IP router:
- To access the IP router’s configurations, open a web browser on the local PC that is connected
to the IP router and enter the router’s address (ex.
http://192.68.1.1
).
- At this stage, make the local PC’s windows network configurations to the below example:
EX.)
IP:192.168.1.2
Subnet
Mask:
255.255.255.0
Gateway:
192.168.1.1
- Once connected to the IP router, it prompts with password. While entering nothing to the User
Name field, enter, “admin” into the password field and press <OK> to access the router
configuration
- Access the router’s DHCP configuration menu and it’s DHCP server activation and provide the
start and end address. Set the start address (192.168.0.100) and end address (192.168.0.200).
Setting Router’s Port Forwarding
To remotely access/view your camera, it is required to perform port forwarding. It is essential to access
the DVR connected to the router from outside of the router’s network.
1) External Port Range: Enter the TCP Port set in the <Port (TCP)> in <Protocol> menu of the
connected DVR. If more than one DVRs are connected to the router, the TCP port can be different.
2) Internal PC IP Address: Enter the IP address set to the <IP> in <Connection> menu of the
connected DVR.
3) Internal Port Range: Set same range as External Port Range.
You can set the network connection route and protocol.
1) Connection Mode: Sets the network connection mode.
2) Bandwidth: Sets the maximum data flow to be transferred (Upload speed) Options will vary
depending on the selected connection mode.
For Static IP, Dynamic IP: Select one from 50 kbps-2Mbps and unlimited.
3) IP, Gateway, Subnet Mask and DNS
For Static IP: You can directly input IP
address,
Gateway,
Subnet
Mask
and
DNS.
For Dynamic IP: IP Address, Gateway and Subnet Mask are set automatically.
4) When the connection setup is complete, click <OK>.
