39
Setting the Motion Detection Area:
1. Select <Motion Region>
2. When “Motion Region” window appears, select a channel for detection and set the area of motion
detection.
3. To set the area in “Motion Region” window select desired region. To set the area cells individually,
click <Individual> button.
4. When selected <Individual>, “Motion Region”
window will appear and you can select cells
one by one or drag the mouse to desired
area to select motion region.
5. Select: Selected cell is set to be a part of
motion detection area.
6. Unselected: Selected cell is removed from
the motion detection area.
7. Inverse: Unselected cells are set to be the
motion detection area.
8. Menu: After selecting individual motion areas,
click menu for the “Motion Region” window to
appear.
9. When the motion detection setup is complete, click <OK>. By clicking <OK>, you
will exit this Motion region setting.
Important:
When setting the Motion Detection, areas in yellow will only detect motion.
3.2.8. Event Record Duration
You can set the beginning and ending point of a recording on an event.
1) Pre Event: The recording of an event will start at a pre-determined time prior to the actual
occurrence of the event. If it is set to 5 seconds, the recording begins from 5 seconds before the
event.
