- 8 -
ASSEMLY REAR WHEEL
A: Nut M16 1pc
B: Washer
Φ
16.5*30*3 1pc
C: Rear wheel
D: split pin 2pcs
E: Rear axle
1. Fix the wheel(C) through the axle.
2. Mount the spring washer (B) and then tighten
the nut (A) securely with 24mm open end
wrench.
3. Install the 2pcs split pin.
ASSEMBLY FRONT SHOCK ABSORBER
A: Bolt M10*40 2pcs
B: front shock
C: Nut M10 2pcs
1. Uplift the frame to align the shock (B) mounting
hole to the shackle joint hole.
2. Fix the bolt (A) through the shock mounting hole
and shack joint and tighten the nut (C) securely
with 13mm -15mm and 14mm -17mm open end
wrenc
h
ASSEMLY FRONT WHEEL
A: Wheel suspension left and right
B: Bolt M10*85*1.5 2pcs
C: Nut M10 2pcs
1. Put the front wheel suspension (A) into the front
swing arm joint, align the bearing hole to the joint
upper and bottom hole.
2. Mount the bolt (B) through the hole and twist the
nut (C),tighten it securely with 14mm - 17mm open
end wrench and 10mm allen wrench.
