27
For Normal Motion Detection:
•
Set: Highlights the grid area. (A click of the mouse on this option produces no
action.)
•
Dot / Line / All: Determines how many targets will be turned ON or OFF.
DOT = single target, LINE = row of targets, ALL = all of the targets.
•
Reverse: Sets all targets to the reverse side.
•
Test: When selected, it brings up the test screen shown on the previous page
(to the right of the Motion Detection Sensor Setup screen).
The Test screen shows when the multiplexer detects motion by drawing a box
around the active area. This provides instant feedback on whether the settings
are acceptable for the application.
Note: A Master Screen Set option appears on this screen to save the image
when setting in the Master Mode.
For Vector Motion Detection:
The Vector Motion Detection is the same as Normal except it has two motion grids.
To detect left to right motion, define the first grid and then define a second grid to
the right of the first grid.
•
A ON: Used to define first grid.
•
B ON: Used to define the second grid.
Reset: The Reset option returns all settings to the motion detection sensor setup
defaults.
Playback & Recording Setup
The Playback and Recording Setup screen provides access to the submenus for setting up
VCR operation with the multiplexer and the recording priorities.
