Fig 35Text
Temperature settings Fig 36Curve
Temperature settings
Fig 37Text
Time Settings Fig 38Curve
Time Settings
NOTE
:
On the setting the mode, if the machine have nothing operate it
will return back to the standby state; on the standby state, the machine have
nothing operate over 30Min will shut down automatically.
Back Soldering operation
After setting the equipment have safety conduction to operation. Put the
circuit board in the middle of the tray, closed chassis, press the key
“RUN”
enter the working state, as shown in
“Fig 39”
、
、
、
、 “
“
“
“
Fig 40”
The working lamp
of machine will be light, and the screen will be display: working…” the
temperature display current temperature, the time display setting time. When
the temperature reaches the set point, the time start to countdown, after the
completion of the countdown the machine will enter the next section. When the
machine is working the working lamp will be shut down or flashing. Under the
graphics display mode, the curve will become broken line as the time goes by,
as shown in
