Product Introduction
APS series power supply is designed for the needs of electronic training
schools, communication maintenance technicians and related engineering
research and development personnel. The current best-stability series voltage
stabilization scheme is adopted for this product, and the digital MCU chip is
used for control. With very high stability and low ripple, simple operation and
control, and complete protection functions, it provide the user with convenient
and reliable high quality power supply.
Product Specification
Power input: refer to the voltage identification at the tail of the product (other
input voltage can be customized).
Rated value/dimensions/weight:
Model
Voltage Regulation
Range
Current Regulation
Range
Input Power
Weight
APS15-3A
0-5V/0-15V
0-0.5A/0-3A
124VA
2.4Kg
Dimensions
：(L)
215mm
*(W)
88mm
* (H)
150mm
Technical Parameters
Constant Voltage mode (CV):
Output voltage range: 0 to rated voltage continuously adjustable.
Power supply variation rate: ≤ 0.01%+3mV.
Load variation rate: ≤ 0.01%+3mV (rated current ≤ 3A).
User Manual of APS15-3A
Maintenance Power Supply
Thank you for choosing our product. Please read this manual carefully before
using this product.
2
4
3
Copyright Information
The design of this product (including internal software) and its accessories is
protected by national laws. Any infringement of our rights shall be subject to the
legal sanctions. When using this product, the user shall consciously abide by
the national laws.
Common Symbol Description
Thank you for use our product. Please read this manual carefully and pay
attention to the relevant warnings and notices mentioned in the manual before
using this product.
Warning
Notice
Noncompliance may cause death or serious injury to the user.
Noncompliance may cause injury to the user or substantial damage
to the object.
User Prerequisites
We request that the user should have common sense of life and the basic
electrical operating knowledge before using this product. The minor shall use
this product under the guidance of professionals or guardians.
[Notice]: To avoid damaging the machine and keep the operating
environment safe, please read this manual carefully and keep it properly
for future reference before using this product.
Safety Precautions
The user shall follow the following basic precautions to avoid electric shock or
personal injury or fire and other hazards when using this product.
To ensure personal safety, the user shall use the parts and accessories
recognized or recommended by ATTEN, otherwise it will cause serious
consequence!
Warning
Do not use this product near inflammables.
Before use, please ensure that the power line is earthed reliably to avoid
electric shock.
Do not use this product if the user is not under the guidance of relevant
personnel, inexperienced or has poor knowledge preparation.
Do not use this product in the humid environment or operate this product
with wet hands to prevent electric shock.
Do not change this product and its accessories without permission.
Please replace the product components with ATTEN original components.
Be sure to turn off the power switch when the user temporarily needs not
to use or stops using this product.
There is high voltage in the product. Do not disassemble the product
without permission from professionals.
Notice
Avoid using this power supply in the environment above 40
℃
.
Reserve
enough space for heat emission holes on the rear panel to dissipate heat.
Confirm whether the current and voltage as well as the specification of
power line meet the requirements.
Before the device is connected to the power supply, please turn off the
power switch.
Do not refit this product and its accessories, which will cause the loss of
warranty qualification and the damage to the product.
Do not place heavy objects on the device.
Do not violently knock this product and its accessories in use,
which will damage the product.
Disclaimer
The company shall not be responsible for any personal injury or property loss
caused by user's failure to follow relevant instructions, natural disasters and
other force majeure, or individual behaviors and other non-quality problems in
the use process of this product.
This manual is sorted, compiled and issued by SHENZHEN ATTEN
TECHNOLOGY CO., LTD according to the latest product characteristics. The
company will make the subsequent changes to product and manual without
prior notice.
Protection function: overvoltage protection/overcurrent protection (cut-off
mode, delay start)/overheat protection.
Other functions: locking function, voltage coarse/fine adjustment, sound
function, 5V/15V voltage switching, 0.5A/3A current switching.
Cooling mode: temperature controlled fan, forced air cooling.
Operating environment:
0℃~40℃
, <80% (indoor use).
Storage temperature and humidity: -10
℃
~70
℃
, <70%.
Packing list: host × 1, power line × 1, user manual × 1.
