ATT Zirocco-M100, Руководство по эксплуатации

Страница: 17 / 39

17
Before start up
Figure 1
Set the adjusting lever to the correct working height:
1) Pull or push the lever.
2) Set the handlebar to the desired position.
3) Release the lever.
Safety Stop
Operating the machine
Figure 2
1) The safety wire is connected to a stop switch. The
wire is attached to the operator during operation. If
the operator moves to a distance of more than 0.5 m
from the machine, the safety wire is pulled, and the
turbine stops.
Figure 3
2) If you press the safety button, the turbine stops.
3
1
2