3
Arrows
Mark B
Mark C
(Lock position)
Mark A
V-shaped protrusion A
2. Two (2) detectors on a loop
■
Power input shall be parallel, and alarm and tamper outputs shall be series connection.
■
Tamper output shall be connected to the input terminals of a security controller.
5
Installation
E+
E-
1
C
T
1
T
2
1
2
3
4
5
6
1
2
3
4
5
6
Controller
Detector
Power
Alarm
Tamper
Power
Alarm
Tamper
Detector
Power
Alarm
Tamper
1
Unscrew the lock screw and turn the body unit
counterclockwise to detach from the base unit.
2
Firmly mount the base unit on ceiling with the mounting
screws provided, and route wiring as necessary to the
rear of the base and through the wiring hole.
3
Determine initial setup. Please refer to "
6. Initial Setup
" for details.
4
Determine coverage. Please refer to "
8. Coverage Setup
" for details.
5
Align direction of both arrows then match Mark A (or V-shaped protrusion A) of the body unit with Mark B of the base unit.
Then turn the body unit clockwise to fix it in a Lock Position (Mark C).
6
Screw the lock screw to fix the body unit on the base unit.
Refer to "11. Coverage" on page 6 to install the unit so that the expected movement of an intruder will be across
the field of view.
Wiring hole
Knockout
