3/17/2008
4248-301-900 - INST
4
20.
Important:
DTC P0701 may often set fluid service. Cycling ignition
clears code and allows Driver or Reverse range to be attained. Cycle
ignition until Drive or Reverse range is attained.
21. Start engine. Move transmission range selector lever through all gear
ranges, checking engagements.
22. With vehicle in
NEUTRAL
, engine running and transmission at normal
operating temperature (
150-170
°
F
), check and adjust transmission fluid
level, and check for any leaks. If fluid is needed, add fluid in increments
of
0.25 quarts
until correct level is achieved (fluid should be between full
and add marks on fluid level indicator).
23. Pour used transmission fluid into approved container and dispose of fluid
at appropriate recycling facility or participating local parts store.
A word of caution to the vehicle owner/installer:
In some applications, or because of the use of certain factory options and/or
aftermarket equipment, clearance problems can occur between the ATS High
Capacity Transmission Pan and other vehicle systems. It is the responsibility
of the vehicle owner/ installer to ensure no other vehicle component comes in
contact with the ATS High Capacity Transmission Pan.
Contact with any
vehicle component, or the making of any modifications to the ATS High
Capacity Transmission Pan, automatically voids the warranty. ATS
Diesel Performance assumes no liability, expressed or implied, for
damage or injury to persons or property.
