Atronic Harmony Upright, Руководство по эксплуатации

Страница: 28 / 51

28
April 2007
Harmony™ Upright - Operating Manual - C-Level
OPEN THE HOPPER DRAWER
This section describes, how to open the hopper
drawer.
1. Unlock the hopper drawer (fig. a),
2. Slide the hopper drawer to the left (fig. b)
3. Pull out the hopper drawer (fig. c).
REMOVE THE HOPPER
This section describes, how to remove or replace the
hopper.
1. Power down the machine.
2. Make sure the coin bowl is empty and open the
hopper drawer.
3. Lift the coin bowl retaining levers on both sides of
the hopper drawer (fig. d).
4. Gently lower the coin bowl until it stops (fig. e).
5. Slide the hopper completely out of the hopper
support guide. Do not use the coin switch or any
other sensitive part to carry or pull the hopper!
6. Re-install the hopper after maintenance or install
a new hopper.
7. Close the coin bowl and make sure the coin bowl
retaining levers are fully engaged.
8. (optional) Clear the message "Hopper failure check
connectors" using the audit key.
M
ACHINE
H
ANDLING
Figure a
Figure c
Figure b
Caution!
The (filled) hopper is heavy!
!
!
figure d
figure e
Coin Bowl
Retaining Lever