manualshive.com logo in svg

Atronic e-motion, Руководство по эксплуатации, Страница: 51 / 59

Поделиться
Скачать
Atronic e-motion Скачать руководство пользователя страница 51

51

April 2007

e-motion™ Operating Manual - B-Level STD

M

ACHINE

 C

ONVERSION

DENOMINATION CONVERSION

If the machine is converted to a new denomination,

these areas of the machine are involved.

Machine Configuration

Denomination Decal

Toplight

Coin In

Coin Out

Machine Configuration

The machine's denomination is set during Initial Setup.

Initial Setup is only applicable after a RAM reset.

Denomination Decal

If the denomination is changed, the denomination decal

must be changed accordingly.

Toplight

If the machine is equipped with a toplight that indi-

cates the machines denomination by its colour, the

toplight cover has to be converted.

Coin In

If a different coin is used, these three areas of the

coin in must be converted according to coin diameter,

thickness and weight.

• Coin Entry Coin Geometry

• Coin Sorting Coin Geometry

• Coin Validator (Damper Weights)

Coin Out

If a different coin is used a hopper conversion is

necessary.

If the new coin is only slightly different from that one

used before, a hopper adjustment might be sufficient.

Note

:

See manual "Hopper", chapter

"part list" for details.

Note:

See manual "Software / Basic

Setup" for a detailed RAM

reset procedure.

Содержание e-motion




























































Отзывы:

Нет отзывов