OPERATION
Charge in well ventilated area.
DO NOT block charger vents. Keep them clear to allow proper ventilation.
CHARGING LITHIUM BATTERY PACKS
It is not necessary to drain the battery pack completely before recharging.
If the charger’s light is not lit at any point during the charging process, remove the
battery pack from the charger to avoid damaging the product. DO NOT insert another
battery. Contact Atrix with any issues.
BATTERY PROTECTION FEATURE
The 22-volt Lithium batteries are designed with features that protect the Lithium
Polymer cells and maximize battery life. When the battery has reached its minimum
voltage level the electronics will shut off the battery. Once the battery shuts off, it must
be recharged.
PREPARING BATTERY PACK FOR CHARGING
BATTERY MUST BE REMOVED FROM VACUUM PRIOR TO CHARGING AND
DURING CHARGING PROCESS.
1. Turn off the power switch.
2. Push tab to
UNLOCK the battery pack and REMOVE battery pack from the
vacuum.
3. Plug the charger’s power cord into the charger.
4. Plug the round connector on the charger’s cord into the battery pack.
5. Plug the charger’s power cord into wall outlet.
6. The indicator light will turn red when charging and turn Green when full charged.
The Battery pack will require approximately 1 hour to full charge.
Note:
Battery pack and charger may get warm while charging.