STANDALONE DVR USER MANUAL
18
、
1 Pull out the green angle pins that inserted in the alarm input and output interfaces.
、
2 Losen the screws on the green angle pins, insert the signal cable into interface under spring, and then tighten the screws.
、
3 Plug in the connected pins into green angle pin socket.
PTZ Input - Connect the PTZ control interface to RS422 TX+ and TX- interfaces at the rear panel. The connection method is
same as above.
Note:
Please
refer
to
PTZ
manual
for
setting
specific
parameters.
Some
PTZ
devices
contain
multiple
telecommunication
protocols,
baud
rates
and
IDs.
VGA/Monitor Input - Video output interface: TV, VGA and S-Video. They can work together simultaneously.
