TIMER
The TIMER has adjustable setting at range from 30 minutes to 6 hours and OFF. As shown the
following: 30 minutes-1h-2h-3h-4h-5h-6h-OFF. If the digital display turns on and nothing hap-
pens within 10 seconds, the digital display will auto shut off. Once you have set the timer, and
the timer is up, close all the functions and enter standby mode. In this mode, you should touch
the power icon to restart the appliance.
INCREASE/DECREASE BUTTON
With the heater on, press the Increase/Decrease button to change the desired temperature.
There are 11 temperature settings:72
℉
-74
℉
-76
℉
-78
℉
-80
℉
-82
℉
-ON-64
℉
---72
℉
(22
℃
-23
℃
-24
℃
-25
℃
-26
℃
-27
℃
-ON-18
℃
---22
℃
).
BATTERIES REPLACEMENT
NOTE:
·Do not mix old and new batteries.
·Do not mix alkaine, standard (carbon zinc), or rechargable (nicad, nimh, etc.) batteries.
·Do not ingest batteries.
CAUTION:
·Always purchase the correct size and grade of battery most suitable for the intended use.
·Replace all batteries of a set at the same time.
·Clean the battery contacts and also those of the device prior to battery installation.
·Ensure the batteries are installed correctly with regard to polarity (+ and -).
·Remove batteries from equipment which is not to be used for an extended period of time.
·Remove used batteries promptly
TROUBLESHOOTING
6
Tube
You
ameriwoodhome.com
Fault code
Fault Cause
Solution
E1
The heater overheating
E2
NTC is defective.
Call after-sales service.
Call after-sales service.
The heater not working. If the vents are dirty or clogged. Unplug the power,
clean the dust and debris of the vent area. Wait for 5
minutes, plug in and turn on the heater. If the heater
still don't work, please call after-sales service.
E3
