APD series bench scale
APD_01_11.05_EN_U
8
6. FRONT PANEL KEYS AND INDICATORS
The front panel of the indicator is designed for quick but simple weighing applications. It consists of a display with 6 digits,
25 mm in height and a 5 keys water-proof film keyboard.
While weighing various multifunction symbols indicating the functioning status will turn on (see the section “SYMBOLS ON
THE DISPLAY”).
SCALE KEY
FUNCTION
ZERO
- Zeroes the displayed gross weight, if it is /- 2% of the total capacity.
- Cancels the value of the tare if the scale is unloaded
.
- When entering numbers it decreases the digit to be modified.
TARE
- If pressed for an instant it carries out the semiautomatic tare.
- If pressed at length it allows entering the manual tare from keyboard.
- Cancels the value of the tare if the scale is unloaded.
- In the numeric input phase it increases the digit to be modified.
M+
- It carries out the totalization if the conditions for this operation are satisfied.
- In the numeric input phase it selects the digit to be modified, from left to right.
MR
- If pressed for an instant, it carries out the display of the number of totalizations and the
present total.
- In the numeric input phase, it confirms the entry made.
- In the SET-UP, it allows to enter a step or to confirm a parameter within a step.
MODE/C
- It turns the scale on and off.
- If pressed during the display of the number of totalizations and present total, it clears the
total.
-
In the numeric input phase, it quickly zeros the present value.
- In the SET-UP, it allows to exit a step without confirming the change made.
- Allows viewing the scale’s metric information: capacity, division, minimum weigh for each
configured range.
Mc
- Memory clear function: by pressing the MR and MODE/C keys in rapid succession the total is
cleared.
