Atop SW550 Series, Руководство пользователя

Страница: 34 / 124

Atop Industrial Wireless Serial Device Server Series
SW550X
User Manual V 1.1
28
scanning and prompt a window.

BSSID: this refers to the Access Point MAC address on which the SW550X should
connect to. Enabling this option will lock SW550X to that Access Point, so SW550X
would not roam to another Access Point with the same SSID.

WPS BUTTON: the acronym stands for Wi-Fi Protected Setup, PBC stands for Push
Button Configuration. To use this feature, first trigger the WPS process in the Access
Point
and click on the WPS PBC button on SW550X’s UI. The AP and the SW550X
should connect automatically. Note that the topology set in this case should be
infrastructure and the Wireless Mode should be Auto so the WPS can work.

Topology: Infrastructure (for connecting to an Access Point) or Adhoc (for connecting to
a wireless client).

Band Mode: 802.11b, 802.11b/g, 802.11b/g/n, 802.11a, and 802.11a/n are available. We
suggest leaving this option to Auto for SW550X to sense the best available mode.

Tx Rate: different rates are available, it is suggested to leave this to Best (auto). This
option is disabled when the band mode is set to Auto.

Channel: the available channels would depend on the band mode and the regulatory
domain selected in the Wireless Advanced Settings. This option is disabled when the
band mode is set to Auto.

Bandwidth: select between 20 MHz or 40 MHz; the latter fills a larger spectrum, hence it
provides a better throughput if it Is allowed by the Access Point. It is not recommended to
use 40 MHz@2.4 GHz (802.11b/g/n).

Secondary Channel: the second channel that SW550X uses when the 40 MHz
bandwidth is enabled.

Authentication Mode: Select between OPEN, WPA-PSK, WPA2-PSK, WPA2 (PEAP),
WPA2(EAP-TLS), and WPA2(EAP-TTLS).

Encryption Type: Select between WEP, TKIP and AES. Please be aware that WEP and
TKIP are not supported by the 802.11n standard, so the wireless link speed would be
limited to 54Mbps.

WEP Key: Enable when Authentication is set to OPEN and Encryption is set to WEP. Up
to 4 different hexadecimal or ASCII keys can be entered in this section.

WPA-PSK/WPA2-PSK Passphrase: Enable when Authentication is set to WPA-PSK or
WPA2-PSK. It can be between 8 and 63 characters long.

WPA2 (with RADIUS): Depending on the Authentication Mode selected, different fields
would be enabled. WPA2 (PEAP) would require you to provide the user, password, and
the certificates. WPA2 (EAP-TLS) would require you to provide the certificates and
private key password. WPA2 (EAP-TTLS) would require you to provide the user,