Atop Smart Security Server
IS150
User Manual V1.0
42
Figure 4.28
BSSID:
this refers to the Access Point MAC address on which the IS150 should connect to.
Enabling this option will lock IS150 to that Access Point, so IS150 would not roam to another
Access Point with the same SSID.
Topology:
Infrastructure (for connecting to an Access Point) or Adhoc (for connecting to a
wireless client). Note that
Adhoc
mode is unavailable when the
Wireless Profiles
is enabled.
Band Mode:
802.11b, 802.11b/g, 802.11b/g/n, 802.11a, and 802.11a/n are available. We suggest
leaving this option to
Auto
for IS150 to sense the best available mode.
Tx Rate:
different rates are available, it is suggested to leave this to
Best (auto).
This option is
disabled when the band mode is set to Auto.
Channel:
the available channels would depend on the band mode and the regulatory domain
selected in the Wireless Advanced Settings. This option is disabled when the band mode is set to
Auto.
Bandwidth:
select between 20 MHz or 40 MHz; the latter fills a larger spectrum, hence it provides
a better throughput if it Is allowed by the Access Point. It is not recommended to use 40 [email protected]
GHz (802.11b/g/n).
Secondary Channel:
the second channel that IS150 uses when the 40 MHz bandwidth is enabled.
Authentication Mode:
Select between OPEN, WPA-PSK, WPA2-PSK, WPA2 (PEAP),
