Atop MB5400, Руководство пользователя

Страница: 41 / 88

Atop Modbus Gateway
MB5400 Series
User’s Manual V 1.3
41
3.9
Alert Configuration
3.9.1 SMTP and E-mail Settings
When enabled, an E-mail alert would be sent to the designated E-mail addresses in the E-Mail
Settings. To setup an email alert function, you first need to configure the
sender’s E-mail
address , the
receiver’s E-mail addresses
(up to three receivers), and the mail server
configuration as shown in Fig. 3.23. Under the Mail Server settings, please fill in the IP address
or host name of a Mail Server . Note to be able to resolve a host name properly, you need to
configure DNS server in Sec.3.6 . If an authentication is required for the mail server, please
check on the Mail Server Authentication Required box and fill in the User Name and the
Password fields. After finishing configuring the SMTP and E-mail Settings, please click on
Save Configuration button to keep all changes that you have made. After a Save
Successfully message showed up, the web browser will be redirected back to the SMTP
Settings page. You can also send a test E-mail from the Modbus Gateway by clicking on the
Send Test Mail button. A pop-up window will notify the user of the result of test mail. If there is
a problem such as “Test sending mail fail”, please re-check the entered information of your
Mail
Server , User Name and Password or check your network connection to the Mail Server .