Atop MB5400, Руководство пользователя

Страница: 21 / 88

Atop Modbus Gateway
MB5400 Series
User’s Manual V 1.3
21
3.4 Configuring Automatic IP Assignment with
DHCP
A DHCP server can automatically assign addresses to LAN1 or LAN2, the Subnet Mask, and
the Gateway (your network gateway, not the Modbus Gateway). You can simply check
“DHCP
(Obtain an IP
Automatically)”
box in the Network Setting dialog using our Serial Manager©
utility and then restart it. Once restarted, the IP address(es) will be automatically configured.
3.5 Web Overview
In this section, only current information on the device’s status and settings will be displayed. An
example of MB5416-
X’s overview page is shown in Fig. 3.7.
Fig. 3.7 Overview Page

Model Name,
as its name implies, shows the device’s model.

Device Information displays information on the Kernel version as well as the AP version
of your Modbus Gateway device.

Network Information shows the Mode in which the Modbus Gateway device is currently
operating on (Dual Subnet Mode or Redundancy Mode), and one of the used LAN for
Redundancy Mode as shown in Fig. 3.7 or both LANs corresponding MAC and IP
addresses for Dual Subnet mode.