Atop MB52 Series, Руководство пользователя

Страница: 13 / 44

MB52XX Modbus Gateway
User Manual
Getting
Started
3.4 Factory Default Settings
3.4.1 Network Default Settings
The MB520X Industrial Modbus Gateway is equipped with one LAN interface with one default IP address . Its default
network parameters are listed in Table 3.3 .
Table 3.3 Network Default Setting
Interface Device IP Subnet Mask Gateway IP DNS
LAN1 10
.
0
.
50
.
100 255
.
255
.
0
.
0 10
.
0
.
0
.
254 0.0.0.0
3.4.2 Modbus Default Settings
The MB52XX Modbus Gateway comes with the following default Modbus settings .
Table 3.4 Modbus Default Settings
Parameter Default Values
Modbus Master
TCP Settings TCP Master Mode : TCP Master
Port : 502
Modbus Slave

MB5201

MB5202
Mode : RTU Slave
Serial Configuration : RS - 232, 9600 bps, 8 data bits, No
parity bit, 1 stop bit, No Flow Control, Buffer Disable
Other default settings are shown in the following table
.
Table 3.5 Other Default Settings
Parameter Default Values
Security
User Name admin
Password default
SNMP
SysName of SNMP atop
SysLocation of SNMP Location
SysContact of SNMP Contact
SNMP Disable ( Unchecked )
Read Community Public
Write Community Private
SNMP Trap Server 0 . 0 . 0 . 0
Note
: Press the “ Reset ” button on the front panel for 5 seconds ( see Section 4.9.8 and Section 4.10 ) , to restore the
MB52XX Series Modbus Gateway to the factory default settings .