ATON DLA2RF, Руководство пользователя

Страница: 9 / 57

© 2007 • All rights reserved. 7
DLA2RF 2 Room Speaker Selector
2. System Design Overview
There are three typical system applications when installing the DLA2RF:
Standard A/V or Stereo Receiver
Zone 2 Output of an A/V Receiver
External Amplifi er
Standard Audio/Video or Stereo Receiver
Most A/V Receivers and Stereo Receivers have two sets of Main Speaker Outputs (typically
labelled “
A ” and “ B ”. While it is certainly possible to connect the DLA2RF to the “ A ” outputs, it
is much more useful to connect the “ A ” outputs to the main speakers (stereo or surround) in
the room in which the receiver is located and connect the “ B ” outputs to the DLA2RF in order
to expand the audio system to additional areas. Figure 2-1 shows the “ B ” speaker outputs of
an A/V receiver connected to to the AMPLIFIER INPUT of the DLA2RF. A pair of speakers are
connected to the DLA2RF’s Room 1 Speaker Outputs, while an additional pair of speakers is
connected to the Room 2 Speaker Outputs. The RF RECEIVER BASE is connected to the ATON
PORT. This application allows the A/V receiver’s speakers to play in the main listening area,
while two additional pairs of speakers play in other areas of the home-each controlled by the RF
remote included with the DLA2RF. This is a single-source application: all areas of the house will
play the same audio source, but with separately controlled volume.
Note: For best audio quality, ATON recommends that Surround Sound and/or DSP modes
(Concert, Hall, Jazz, etc.) be disabled prior to playing audio through the DLA2RF.
CLASS 2 WIRING
A/V Reciever
Speaker Outputs
Room 2
Speakers
ATON
PORT
PATENT
PENDING
PWR IN
12VDC / 2.1A
AMPLIFIER
INPUT
1
IR EMITTER
OUTPUTS
Speaker
Cables
PS3
POWER
SUPPLY
Room 1
Speakers
Speaker
Cables
RF
Base
+
-
L L R R
B A
Figure 2-1: DLA2RF w/ A/V Receiver Output B Overview
1.
2.
3.