51
Connecting the base station to the PABX
Aton CLT300 - Gig S455 / swisscom-en / Internet / pabx.fm / 08.03.2007
Connecting the base station
to the PABX
The following settings are only needed
when your PABX requires them. Please
refer to the user guide for your PABX.
You cannot send or receive SMS on PABXs
that do not support Calling Line Identifica-
tion.
Flash time
The current setting is indicated by .
Setting the flash time
v
¢
Ð
¢
Base
¢
Add. Features
¢
Recall
s
Select flash time (
= on)
and press
§OK§
.
a
Press
and
hold
(idle status).
Setting pauses
Changing pause after line seizure
You can change the length of pause that is
inserted between pressing the talk key
c
and sending the number.
v
Open menu.
5 5 O 1 L
Press keys.
~
Enter digit for the pause
length (
1
= 1 sec.;
2
= 3 secs.;
3
= 7 secs.) and press
§OK§
.
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
v
Open
menu.
5 5 O 1 2
Press keys.
~
Enter a digit for the length of
the pause (
1
= 800 ms;
2
= 1600 ms;
3
= 3200 ms)
and press
§OK§
.
‰
‰
