ATON CLT300, Руководство пользователя

Страница: 45 / 68

43
Using several handsets
Aton CLT300 - Gig S455 / swisscom-en / Internet / registr_sett.fm / 23.04.2007
The external caller hears the
wait melody if activated (see
page 49).
s
Select handset and press
§OK§
.
Ending an enquiry call
§End§
Press the display key.
You are reconnected with the external
caller.
Accepting/rejecting call waiting
If you get an external call while conduct-
ing an internal call, you will hear the call
waiting tone (short tone). The caller's
number will appear in the display if phone
number identification is enabled.
Ending an internal call, accepting an
external call
§Accept§
Press the display key.
The internal call is ended . You are con-
nected to the external caller.
Rejecting external call
§Reject§
Press the display key.
The call waiting tone is turned off. You
remain connected with the internal partic-
ipant. The ringtone can still be heard at
other registered handsets.
Linking internal callers to
an external call
Important: The
Listening In
function must
be activated.
You are conducting an external call. An
internal caller can listen in on this call and
take part in the conversation. All the par-
ticipants are made aware of the 'listening-
in' by a signal tone.
Activating/deactivating internal
listening in
v
¢
Ð
¢
Base
¢
Add. Features
¢
Listening In
a
Press and hold (idle status).
Internal listening in
The line is engaged with an external call.
Your screen will display information to
that effect You want to listen in to the
existing external call.
c
Press and hold the talk key.
You are linked into the call. All participants
hear a signal tone. During this time, this
handset will not display any information
or messages and no selection can be
made from this handset.
Ending listening in
a
Press the end call key.
All participants hear a signal tone.
If the
first internal participant presses the
end call key
a
, the handset that has 'lis-
tened-in' remains connected to the exter-
nal caller.
Changing the name of a handset
The names "INT 1", "INT 2" etc. are
assigned automatically at registration.
You can change these names. The name
must be no more than 10 characters. The
changed name is displayed in every hand-
set's list.
u
Open list of handsets. Your
own handset is indicated by < .
s
Select handset.
§Edit§
Press the display key.
~
Enter name.
§Save§
Press the display key.