ATOMRC Killer Whale, Руководство пользователя

Страница: 10 / 10

1.Hold button 3 seconds into setting mode.
2.In setting mode. short press the button to change band.
3.Then hold button 3 seconds into CH setting mode, short press button to change CH.
4.Hold button 3 second to get into Power setting mode, there is short bar on LED, short
press to switch power, 1 bar means 200mW, 2 bar means 800mW, 3 bar means 1500mW.
1. ⻓按设置按键三秒，进⼊波段设置模式。
2. 在设置模式下，短按按键切换波段。
3. 再次⻓按按键三秒钟，进⼊频道切换模式，短按按键切换频道。
4. 再次⻓按按键三秒钟，进⼊切换功率模式，短按按键切换功率，数码管⼀条为 200mw ，两条
为 800mw, 三条为 1500mw 。
Please download the latest user manual at
www.atomrc.com/pages/download
GND
VIDEO
5V
AUDIO
VIDEO
GND
5V OUT
GND
VCC
Please make sure antenna is installed before power on, otherwise the VTX will fried!!!
图传发射机通电前务必确认天线已安装妥当，否则发射线会烧毁 !!!
Band Channel
1 2 3 4 5 6 7 8
Band A
5865 5845 5825 5805 5785 5765 5745 5725
Band B
5733 5752 5771 5790 5809 5828 5847 5866
Band E 5705 5685 5665 5645 5885 5905 5925 5945
Airwave/FS
5740 5760 5780 5800 5820 5840 5860 5880
Race Band
5658 5695 5732 5769 5806 5843 5880 5917
L Band 5362 5399 5436 5473 5510 5547 5584 5621
Voltage input/ 电压输⼊范围 : 2~6S Lipo Power/ 功率 : 200/800/1500mw Switchable
Power consumption/ 功耗 : 9V 1.1A Frequency/ 频率 :5.3~5.9Ghz
VTX Tx15 Uermanual/ 图传说明书
Tx15 Wiring Tx15 图传接线图 Diagram/
Tx15 /Tx15 规格参数 Specs
VTX Setting/ 图传设置