Atomic SENSORED ESC, Инструкции

Страница: 2 / 4

INSTRUCTIONS ATOMIC
INSTRUCTIONS
2
Thank you for purchasing the ATOMIC SENSORED ESC (electronic speed controller).
We strongly recommend reading through this user manual before use. We do not assume responsibility for
any losses caused by unauthorized modifications to our product. We are only responsible for our product
cost and nothing else as result of using our product.
Warnings:

Ensure all devices or wires are well connected, in order to prevent poor connections that may cause
your vehicle to lose control or other unpredictable issues like damage to the device.

Always disconnect and remove batteries after use, as the ESC will continue to consume current if it’s
still connected to batteries (even if the system is turned off). Long‐time contact will cause batteries to
completely discharge and result in damage to batteries or ESC or both.
Features:

Ultra mini size, easy to put on 1:28 scale RC cars

Compatible with both sensored or sensorless brushless motors on the market.

Aluminum casing with excellent heat dissipation.

Various protections control: motor locked up protection, low‐voltage cutoff protection, thermal
protection and fail safe.

Advanced programming via portable LCD program box (sold separately).
Specifications
Current Rating 24A Continues, 40A Peak
BEC Output 6V – 1.5A, 7.4V ‐‐ 1A
Battery Input 2 cell lipo (7.4V), 4 cell NiMh (4.8V)
Dimension: 20*14*7mm
Motor Compatibility Both Sensored or Sensorless motors (15 or 16mm diameter), 12000Kv or below
Applications 1:28 or 1:24 RC cars