Atomic G01889CF, Руководство по сборке

Страница: 9 / 16

© 2018 Escalade Sports
For Customer Service Call 1-888-996-2729
9
All Rights Reserved.
PARTS REQUIRED:
6 pcs - H6 Phillips Round Head Screw 4 pcs - P11 Corner Cap 2 pcs - P18 Ball Entry Cup
8 pcs - H9 Phillips Flat Head Screw 2 pcs - P13R Scorer 4 pcs - P24 Cup Holder
16 pcs - P17 Rod Bushing
FIGURE 7
STEP 7:
Carefully peel the paper protective coating from adhesive strips from the back of the P11 Corner Caps to reveal
adhesive strips. Attach P11 Corner Caps using H9 Screws as shown in FIGURE 7 .
Tighten, but do not strip out H9 Screws.
Attach
P13R
Scorers onto the top of
P2
End Aprons as shown in
FIGURE 7
.
Insert P17 Rod Bushings onto both P1 Side Aprons as shown in FIGURE 7 .
Please make sure to insert P17 Rod Bushings from the inner side of P1 Side Aprons for correct assembly.
Attach P18 Ball Entry Cups using H6 Screws as shown in DETAIL C .
Tighten, but do not strip out H6 Screws.
Carefully - Tap
P24
Cup Holders down into
P2
End Aprons as shown in
FIGURE 7
.
P13R
Note:
Red Bead scorer should
be on opposite side of
Ball Return.
P13
Note:
Red Bead scorer should
Pilot Holes
be on opposite side of
Ball Return.
P11
H9
H9
DETAIL C
P17
P18
H6
P24
Note:
Carefully tap P24
Cup Holders down.
Rubber
Hammer
IMPORTANT NOTE: P17 Rod Bushings may require the use of a rubber hammer for installation into side apron.
With a rubber hammer, lightly tap bushing squarely into place. DO NOT USE STEEL HAMMER!
If a rubber hammer is not available, place a piece of wood squarely on bushing and lightly tap into place.
EUROPEAN
SOCCER STYLE
P28
45° Angle
Cut
Peel the adhesive strip protective coating off the underside of the P28 Short Playfield Trims, then very carefully
place them along P3 Playfield as shown in FIGURE 7 .
2 pcs - P28 Short Playfield Trim