Atomic G01889CF, Руководство по сборке

Страница: 12 / 16

© 2018 Escalade Sports
For Customer Service Call 1-888-996-2729
12
All Rights Reserved.
PARTS REQUIRED:
6 pcs - H6 Phillips Round Head Screw 4 pcs - P11 Corner Cap 2 pcs - P18 Ball Entry Cup
8 pcs - H9 Phillips Flat Head Screw 2 pcs - P13R Scorer 4 pcs - P24 Cup Holder
2 pcs - P9 Long Playfield Trim 16 pcs - P17 Rod Bushing
FIGURE 12
STEP 12:
Peel the adhesive strip protective coating off the underside of the P9 Long Playfield Trims, then very carefully
place them along P3 Playfield as shown in FIGURE 12 .
FIGURE 12 .
FIGURE 12 .
FIGURE 12 .
FIGURE 12 .
Carefully peel the paper protective coating from the adhesive strips from the back of the P11 Corner Caps to
reveal adhesive strips. Attach P11 Corner Caps using H9 Screws as shown in
Tighten, but do not strip out H9 Screws.
Attach P13R Scorers onto the top of P2 End Aprons as shown in
Insert P17 Rod Bushings onto both P1 Side Aprons as shown in
Please make sure to insert P17 Rod Bushings from the inner side of P1 Side Apron for correct assembly.
Attach P18 Ball Entry Cups using H6 Screws as shown in DETAIL F .
Tighten, but do not strip out H6 Screws.
Carefully - Tap P24 Cup Holders down into P2 End
Aprons as shown in
P9
P13R
Note:
Red Bead scorer should
be on opposite side of
Ball Return.
P13
Note:
Red Bead scorer should
be on opposite side of
Ball Return.
P11
H9
H9
DETAIL F
P17
P18
H6
P24
Note:
Carefully tap P24
Cup Holders down.
Rubber
Hammer
IMPORTANT NOTE: P17 Rod Bushings may require the use of a rubber hammer for installation into side apron.
With a rubber hammer, lightly tap bushing squarely into place. DO NOT USE STEEL HAMMER!
If a rubber hammer is not available, place a piece of wood squarely on bushing and lightly tap into place.
AMERICAN
SOCCER STYLE
Pilot Holes
Right Angle
Cut