
IMPORTANT INFORMATION
• This product must only be installed by a licensed
electrician.
• Before commencing installation turn off and isolate the
electrical supply.
• No user serviceable / replaceable parts inside.
• Do not attempt to service other parts of the unit as this
will void the warranty.
PIR sensor 12 m - wall mount - IP44 - black
INSTruction MANUAL
AT4110/PIR/BLK
PIR SENSOR
Product Specification
Sensors
PIR, ambient light
Supply voltage
220 V ~ 50 Hz
Output load
1200W incandescent
300W inductive
150W LED
Operating temperature
-20 to 40°C
Field of view
180°
Detection range
Max. 12 m (< 24 °C)
Detection motion speed
0.6 - 1.5 m/s
Time delay
Min. 10 sec ± 3 sec
Max. 7 min ± 2 min
Ambient light
< 3 - 2000 lux (adjustable)
Ingress protection
IP44
Material
PC UV stabilised
Mounting
Mounting options
Wall mount
Mounting centres
60 x 48 mm
Installation height
1.8 - 2.5 mm
Dimensions
100 / 87 / 79 mm
79
87
100
Installation
Remove the product from the box and inspect it for any damage. If you
believe the product to be damaged or otherwise unsound, do not install
the product. Please return it to the place of purchase for replacement.
If the product is satisfactory, proceed with the installation:
1. Remove both screws from the front of the product and detach the
terminal block cover.
2. Feed the mains cable through the gasket on the terminal block
cover. Connect the mains cable into the terminal block, as per the
wiring diagram below.
3. Fix the terminal block cover to the wall in the desired position.
4. Reattach the sensor to the terminal block cover and fix screw
in position.
Wiring diagram
Detection pattern
Detection Zone
Range ø
Height
Max
12 m
2.5 m
2
2
4
4
6
6
10%
25%
50%
75%
100%
6
2
8
10
12
4
1
2
terminal block cover
gasket
mounting screws
N Blue
N
L’ Red
Load
L Brown
IN~
L