SDA300 Sig
ATOLL ELECTRONIQUE
Page 9
ATOLL APP:
A free application for smartphones and tablets is
available to control your Streamer. It can be found
on the Apple Store (iOS) or Google Store (Android)
download sites under the name of
ATOLL Signature
.
First, make sure your smartphone is connected to
WIFI on the same network as your Streamer. In this
case, your device appears on the screen of your
smartphone just after starting the application, you
have just to select it.
The application uses the data displayed on
screen: radio station logo, audio stream, volume, etc.
You can navigate the menus and adjust the analog
volume level.
It is possible to wake up from standard standby from the application: start a song or a radio, the device
automatically wakes up from standby.
These applications undergo regular updates, their operation and their possibilities are therefore likely to evolve
over time.
FIRMWARE UPDATE:
This menu allows toy yo make an update your appliance. Select “Check for update” some time to time. If there
is no update, the display will show “No new updates”.
If an update is available, the devices will automatically launch it. This may take several times so let the device
run until it starts again.
RETURN TO FACTORY SETTINGS:
This menu allows you to restart the device with the factory settings. If you press it, the appliance will start again and
in the English version. Note that some menus will be refreshed such as PlayQueue or the Favorites Internet radios.
STREAMING AUDIO QUALITY:
This menu allows you to choose the quality of files in 24 bits/192 kHz or 24 bits/96 kHz.
In the event of limited internet speeds, favor 24 bits/96 kHz quality in order to preserve bandwidth.
VOLUME OF THE DIGITAL OUTPUT:
Configures variable or fixed the digital output signal depending on the volume; this makes it possible or not to
adjust the volume when using an external DAC.
DEVICE ID :
This menu allows you to name the device to be visible from devices such as
Roon
.
BALANCE :
Allows you to adjust the left-right balance: using the volume keys - and +. This balance remains stored.
CONTROL FROM A COMPUTER:
It is possible to control your network drive from a computer screen by typing in the search bar of your internet
browser the IP address of your network drive followed by /webclient:
192.168.xxx.xxx/webclient
POWER MANAGEMENT:
Allows you to choose the time after which automatic standby starts:
- Delay before standby
: When the device is not playing or when no source is selected: choice between 5, 10,
15 or 30 minutes before standby.
- Max inactive playback time in seconds
: When the device is not playing or no source is selected: choice
between 1, 8 or 24 hours before standby.
- Display intensity
: This menu lets you choose the light intensity of the display (off, low, medium or high). If
you choose the “off” mode, the display will turn off each time after a few seconds. Each press of a button on
the remote control or on the front panel reactivates the display temporarily. You can also choose this function
directly with the DISP button (37) on the remote control.
