ATO Aerielle AudioBUG, Руководство пользователя

Страница: 2 / 6

AudioBUG™ is not only compatible with every audio player, but it will
broadcast to any radio or stereo. Whether it is your surround sound stereo
system in your family or living room or on your car stereo, AudioBUG™
just plugs and plays.
AudioBUG™ Features and Components
1. Power on
2. Frequency Selector
3. 3.5 mm stereo cable
4. Battery Compartment “CR2”
< Insert Photo of AudioBUG with markings and descriptive indic ations (i.e.
arrows etc. >
Auto-Off Functionality
The AudioBUG™ has an auto-off feature. If after more than 80 seconds
there is no detection of audio, the AudioBUG™ will turn off. This saves
useful battery life. When turning off your audio source, your AudioBUG™
turns off automatically.
Setup Procedure
Setting up your AudioBUG™ is an easy procedure. Simply:
1) Remove the battery cover from the top of unit by gently sliding the
battery door marked toward you.
2)
Install 1 CR2 battery with the negative end facing the eyes of the
AudioBUG™.
3)
Plug the 3.5mm stereo cable into the audio out connector or the
headphone jack of the audio source you wish to transmit. *
4)
Select the frequency that you wish to transmit to with the selector on
the side of the AudioBUG™ (88.1, 88.3, 88.5, 88.7 MHz)
5)
Press the POWER button eye (left EYE) on the front of the unit.