ATN XTV 131, Руководство пользователя

Страница: 7 / 31

P a g e | 7
4– Setup Menu Setting:
T he Setup menu can be accessed by pressing the “Setup” button on your remote to access some
advanced settings for the receiver. To scroll through each item, use the up/down arrow keys, to
adjust the value, use the left/right arrow keys located around the “OK” button.
1- Saturation: If you realize that the picture is not clear or not saturated enough, you can
adjust that setting; a preview will apply immediately in background. Once you confirm you
are satisfied with the new setting, press the “OK” button to save the setting, otherwise,
the previous setting will be reverted back.
2- Contrast: If you think that the picture has too much contrast or too low contrast, use that
option to adjust it accordingly.
3- Hue: This will be used to adjust the level of color of the picture, if you find that the picture
does not show full color on the TV or too much or dim colors.
4- Brightness: Adjusting the brightness of the screen
5- HD Output: This setting can only be adjusted if you are using HDMI or Component Cables.
On S-Video/Composite output this does not apply. If you are using HDMI and you set it to
an unsupported resolution by your TV, and the screen turns black, then you can use one of
the above Composite/S-Video connections to revert the setting back and then reconnect
the HDMI or component cables again.
6- SD Output: This can be used to adjust the color format, in USA; this setting should always
be NTSC, in other Europe/Middle East countries this needs to be set to.
7- Aspect Ratio: If your TV does not support widescreen, or if your TV does not show the
screen fully, you can adjust this setting to one of the 3 available settings, (4:3, 16:9, Full
Screen), this can also be accessed on the fly by pressing the Change Aspect Ratio “A/R”
button on your remote.