3
• Next, remove the lens cap/daylight filter. Adjust the front lens for the distance of the
focus. You should not have to readjust the diopter.
• To turn the unit off, rotate switch counter clockwise to initial position.
INTERPUPILLARY DISTANCE
A d j u s t s f o r d i s t a n c e
between eyes by slid-
ing the eyepieces either
together or apart so each
eye can observe the entire
field at the same time.
FOCUSING
To focus the NVG-7, first you will need to adjust the diopter.
Simply turn the diopter clockwise until it stops. Then, while
looking through the diopter at an object, slowly turn the diopter
back counter clockwise until the grain in the image is sharp.
NOTE:
We suggest that you focus the diopter during daylight
with the filter on.
Next focus the front lens until the image and the grain are both
sharp. When you are in low-light conditions and the daylight
filter is off, you may focus the front lens to receive sharp image,
the diopter should not be adjusted.
NOTE:
The front lens should be readjusted as you view objects
at different distances.
INFRA-RED ILLUMINATOR
Infra-red illuminators, or IR illuminators, are common to night
vision. The IR light greatly enhances the performance of the
NVG-7 while remaining almost totally invisible to the naked
eye.
The NVG-7 goggles have a built in IR with indicator “ON” light
within the FOV. To turn the IR on, rotate power swith
clock-
wise in first position
. It is important to remember that the IR
illuminator is simply an infra-red light source, and like any
light source, it may loose its effectiveness over a great dis-
tance.
To turn the IR off, push the button again by long press (more than 1.5 sec.).
NOTE:
The IR will automatically turn off when the unit’s power is turned off.
FLIP-UP HEADSET
FITTING THE HEADGEAR
1) Fit the headgear to your head size. Adjust the head gear first before attaching the NVG-7 to it.
2) Loosen all the straps and place the headgear on your head.
3) Tighten the straps until the headgear fits firmly.
GOGGLES INSTALLATION AND ADJUSTMENT
Now you are ready to mount the NVG-7 on to your headgear.
1) Remove the already adjusted headgear from your head.
Built-in Infra-red Illuminator
Diopter adjusting
Lens focus adjusting