2
FEATURES
• Lightweight, compact rugged Goggle system
• Multi-purpose: hand-held, head-mounted or helmet-mounted
• Comfortable, flip-up headgear
• Multi-coated all-glass optics
• Wide angle infrared illuminator
• Adjustable Interpupillary Distance
• Optional 3x, 5x and 8x lenses available
• Water and fog resistant
• Limited Two-Year Warranty
APPLICATION
Compact and lightweight, rugged, and a top-notch performer the NVG-7 is an exceptional choice
for hands free usage.
The NVG-7 goggles have a built in IR for total darkness with indicator “ON” light within the FOV
and a flip-up headset.
The NVG-7 is available with a wide range of image intensifier options to meet a wide array of
specification requirements.
The NVG-7 night vision goggles is a complex opticoelectronic system for individual use. The
device consists of the objective lens assembly, eyepiece and the body. The body contains a
image intensifier tube assembly with an integrated high voltage power source and the battery
housing.
Objective lens protective cover is intended to protect the objective lens from dust and scratches.
It also will act as a daylight filter, allowing you to test the scope in daylight or other bright light
situations. The pinhole in the center of the protective cover allows the user to check the operation
ability of the device in daylight conditions.
NOTE:
Do not test the scope in daylight conditions even with the daylight filter/lens cap on for more
than ten (10) minutes.
BATTERY INSTALLATION
Install standard CR123A batteries as follows:
1. Unscrew the battery cap (A).
2. Insert CR123 battery (B), observing the polarity as indi-
cated.
3. Replace the battery cap and screw cap hand tight.
OPERATION
• Take the NVG7 out of the case.
• Install the battery into the housing with the polarity order as shown on the scope. Bat-
tery Type: 3 V, Lithium, CR123A .
• To turn on the device rotate switch clockwise in first position. Turn the unit on by the
protective lens cover still attached to the lens.
Do not turn the unit on in the daytime
without the protective lens cap on.
You should see green glow in the eyepiece.
• Observe the scene and adjust the diopter for optimal image clarity.
• You may now enter a dark environment or simply shut the lights off in order to darken the
room.
A
B