ATN ATN PS28, Руководство оператора

Страница: 34 / 48

3-2
3.1. PREVENTIVE MAINTENANCE
CHECKS AND SERVICES (PMCS)
3.1.1. PREVENTIVE MAINTENANCE CHECKS AND
SERVICES TABLE
A. General
To ensure the readiness of the NVFS, perform the preventive main-
tenance procedures in accordance with Table 2.2., prior to each
mission. Preventive maintenance procedures include inspection,
cleaning, and performance of the checkout procedures.
B. Warnings and Cautions
Always observe the WARNINGS and CAUTIONS appearing in
the table. Warnings and cautions appear before applicable pro-
cedures. You must observe the warnings and cautions to prevent
serious injury to yourself and others, or to prevent your equipment
from being damaged.
C. Explanation of Table Entries
(1) Item Number Column.
Numbers in this column are for refer-
ence. When completing Equipment Inspection and Maintenance
Worksheet, include the item number for the check/service indicat-
ing a fault. Item numbers also appear in the order that you must do
checks and services for the intervals listed.
(2) Interval Column.
This column tells you when you must do the
procedure in the procedure column. BEFORE procedures must
be done before you operate or use the equipment for its intended
mission. DURING procedures must be done during the time you
are operating or using the equipment for its intended mission. AF-
TER procedures must be done immediately after you have oper-
ated or used the equipment.
(3) Location, Check/Service Column.
This column provides the
location and the item to be checked or serviced. The item location
is underlined.
(4) Procedure Column. This column gives the procedure you
must do to check or service the item listed in the Check/Service
column to know if the equipment is ready or available for its in-