manualshive.com logo in svg

ATN ATN PS28, Руководство оператора

Поделиться
Скачать
ATN ATN PS28 Скачать руководство пользователя страница 12

1-6

•  Is mounted on MIL-STD-1913 rail or dayscope lens.
•  Is submersible to 10 m for 30 minutes.
•  Filled with dry nitrogen to prevent internal fogging.

D. System Limitations

The PS28 is an effective night vision system designed for night op-

erations but does have the following limitations:

•  The sight requires some night light (moonlight, starlight, etc.) to 

operate. Night light is reduced by such factors as passing cloud 
cover and objects that produce shadows.

•  The sight is less effective viewing through rain, fog, sleet, snow, 

smoke.

• Under starlight conditions low contrast environments (such as 

snowcovered territory, sandy deserts, large bodies of water or 
grassy hills) degrade visibility thereby disguising or masking 
changes in terrain.

•  Under low-light conditions the sight looses some of the resolu-

tion that it has under full moon.

TABLE 1-1. SYSTEM DATA

ITEM

DATA

Magnification

Unity (1 X)

Boresight Characteristics:
Accuracy

Factory aligned to ½ MOA or better

Retention

Permanent to within 1 MOA or better

Repeatability

Within ½ MOA

System Resolution subject to Tube Resolution:
36 to 44 lp/mm

0.38 mrad/lp

45 to 54 lp/mm

0.30 mrad/lp

55 to 64 lp/mm

0.25 mrad/lp

Over 65 lp/mm

0.21 mrad/lp

Содержание ATN PS28

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды