Atmospheric Water Systems dewpoint DH9, Руководство пользователя

Страница: 5 / 46

1
Quick Start Guide
quick start guide
When your Dewpointe arrives, please refer to the following steps for installation:
Do NOT immediately connect your Dewpointe to an electrical power source when you take it out of the packing 1.
material. Let it sit overnight in standing position to allow the refrigerant in the compressor to settle.
NOTE: Plugging the Dewpointe immediately to power may permanently damage the compressor.
Your new Dewpointe should be placed on a solid and level surface and must be situated in a place with good 2.
air circulation. The unit should be placed at least six inches from the wall. Push levers down on the two front
braking wheels once the unit is in its final position to lock it in place.
Plug in the Dewpointe, and let it fill up to capacity. 3.
NOTE: Make sure your Dewpointe has been allowed to sit upright overnight.
4. To dispense water, press and hold Cold Water Button ( ). To dispense hot water, you must first unlock the Hot
Water Button, more on page (14).
For the initial operation, it is recommended that you dispense and discard the first tankful of water to remove the 5.
“new filter” taste.
NOTE: A slightly metallic taste may persist for the first tank full of water. It is not harmful.
The Dewpointe comes preset for your convenience. The hot water is set to 197ºF and the cold water is set to
41ºF. To change the preset temperatures, follow the direction on page (11).
The Dewpointe is designed to remain operational to ensure water purity. If the Dewpointe has been left off for
more than 24 hours, please refer to the draining and cleaning instructions begining on page (25).
If you plan on turning your Dewpointe off for a prolonged period of time, we recommend that you drain the unit.
If you have any questions please contact Customer Service:
cs@aws-h2o.com | (866)-857-5074