User Guide & General Maintenance
Rainier Summit R1
9
1-888-MY-AIR11 CAG-06-21-002 AtmosAir.com
03
TROUBLESHOOTING
System Not Powering On
Power Light Will Not Illuminate
■
Check your power source to be sure there is power to the
unit. Check the wall plug to be sure the plug adapter is
securely snapped into place.
■
Check to be sure the unit is in the “On” position.
■ Check to ensure the system filter is securely in place and
depressing the power defeat switch down so that the unit
can operate.
■
Check the system fuse located at the rear of the unit and
replace if all the above have been checked and a blown fuse
is causing the malfunction.
Note
:
If all the above steps have been performed and the unit still will
not power on, contact the reseller you purchased your unit from for
more assistance and possible warranty service.
Follow all the above steps for powering on. The power light will
illuminate if the system is powered and functioning.
Unit Keeps Blowing Fuses
First check to be sure the power source is rated for the
same voltage as the unit. Also ensure you have a steady
power source free of power surges, use a surge protection
device if needed.
If power is correct and stable, blown fuses can be a sign
of an internal short circuit or a malfunctioning bi-polar ion
tube. Contact your AtmosAir reseller for assistance if this
problem persists.
