Page 4
East Coast: 203-335-3700
West Coast: 480-629-4784
www.AtmosAir.com
Installation, Operation & Maintenance Guide - FC-400 FM
CAG-04-19-001-USA
1. Product Overview
The AtmosAir FC-400FM series (Flush - Mount) ionization generators are small residential-sized units
intended for installation in air conditioning systems or in custom-designed air distribution systems in
small commercial spaces and typical residential houses. AtmosAir equipment is effective in reducing
odors and harmful pollutants through the introduction of positive and negative ions into the air-
stream to be treated. The number and size of the ionization units used is dependent upon the airflow,
size of the space, and severity of the pollution and odors. The AtmosAir FC-400 series equipment is
designed for minimal maintenance. The FC-400 series has two components that require inspection and
maintenance:
1. AtmosAir FC-400 series base unit comp Fuse
2. Ionization tube
Because there are no moving parts, little maintenance
is required and the systems have very low failure rates
and minimal maintenance requirements. For more
information, read the AtmosAir FC-400 series submittal
documents.
1.2 FC-400 FM Diagram
AtmosAir FC-400 FM Layout:
A.
Power Input
B.
Ionization Tube
C.
Blue LED Power Light
D.
Mounting Holes
E.
Fuse Holder
F.
Silicone Foam Gasket
Overall Mounting Plate Dimensions:
FC-400 FM: 6” (15.25cm) L x 3.5” (8.9cm) W x 1.6” (4cm) H
Silicone Foam Gasket Seal: 0.200” (0.5cm) Thickness
A
B
D
5.5” (14cm)
6” (15.25cm)
3.5”
(9cm)
3.5”
(9cm)
1.6”
(4cm)
C
2.5” (6.35cm)
∅
Minimum Duct
Cut-Out
Diameter
F
E
Fig. 1.2a
Fig. 1.2b
Fig. 1.2c
