12
4857C–AUTO–07/06
ATAK5276-83
6.
Demonstration Performance
6.1
Protocol Sent Indicated by LED on Receiver Board
1.
After starting the demonstrator, insert the battery into the slot of the
ATAB5283/ATAB5282 receiver board and place the board within a distance of about
50 cm of the ATAB5276, along the transmitter antenna axis.
2.
Press the RESET button once to reset the AGC control of the ATA5283 as shown in
Figure 6-1.
ATAB5283 Receiver Board
3.
The ATA5283 data pattern is already loaded by default. If appropriate, ATA5282.dat or a
custom file can be loaded. To do this, click on load Pattern (see
).
Figure 6-2.
Load Pattern
4.
Select one of the .dat files (see
). The ATA5283.dat protocol con-
sists of a preamble followed by data which will be indicated by LED. In contrast, the
ATA5282 requires, in addition, a header ID after the preamble before data are sent.
These patterns are offered by ATA5282.dat file.
