Atmel ATA8510-EK1, Примечание к применению

Страница: 6 / 22

When removing the CMM-1923 real-time clock, the transmission of an RF telegram can be initiated by
pressing the S2 button (for more information, see
Figure 3-2 ). The display can be switched to different
modes via the buttons 1-3 on the Xplained PRO OLED1 extension board (for more information, see
section
Base Station Application for SAMD20 MCU ).
The tool pack zip folder [10] contains the documentation and software for the kit. Extract the folder into a
directory on the PC to get the following structure:
..\Application_Notes Documentation for the kit and the application notes
for the devices
..\Documentation Device datasheets
..\Hardware Hardware documentation of the boards
..\Software Kit software and tool support extensions
..\Software\Programming_Files Device programming files in *.hex format
..\Software\IDE_Support_Files Tool support files for IAR Workbench and Atmel
Studio 6
..\Software\base Software project and sources for the Xplained PRO
kit
..\Software\base\EEPROM Configuration file for the Atmel ATA8515 device of
the base station
..\Software\base\SAMD20_XplainedPRO_SW Atmel Studio 6 or 7 project directory
..\Software\sensor Software project and sources for the remote sensor
..\Software\sensor\EEPROM Configuration file for the Atmel ATA8510 device of
the remote
sensor
..\Software\sensor\ATA5831_FLASH_IAR_2.32.0 IAR Embedded Workbench project directory
1.2. Upgrade Kit V1.x to V2.0
Any Atmel
®
ATA8510-EK1 kit can operate with V2.0 tool pack by programming the SAMD20 base station
with the application software from tool pack V2.0 [10]. The remote sensor need no update and will
operate with V1.x and V2.0 base station applications (see section
Xplained PRO SAMD20 Base Station
for more details).
Atmel User Guide for the Evaluation Kit ATA8510-EK1 [APPLICATION NOTE]
Atmel-9343D-ATAN0046_Application Note-09/2016
6