Atmel AT91SAM7A3-EK, Руководство пользователя

Страница: 9 / 26

AT91SAM7A3-EK Evaluation Board User Guide 3-1
6165C–ATARM–26-Jun-06
Section 3
Board Description
3.1 AT91SAM7A3
Microcontroller
!
Incorporates the ARM7TDMI
®
ARM
®
Thumb
®
Processor
– High-performance 32-bit RISC Architecture
– High-density 16-bit Instruction Set
– Leader in MIPS/Watt
!
Embedded ICE In-circuit Emulation, Debug Communication Channel Support
!
256 Kbytes of Internal High-speed Flash, Organized in 1024 Pages of 256 Bytes
– Single Cycle Access at Up to 30 MHz in Worst Case Conditions
– Prefetch Buffer Optimizing Thumb Instruction Execution at Maximum Speed
– Page Programming Time: 6 ms, Including Page Auto-erase, Full Erase Time:
15 ms
– 10,000 Write Cycles, 10-year Data Retention Capability, Sector Lock
Capabilities
!
32K Bytes of Internal High-speed SRAM, Single-cycle Access at Maximum Speed
!
Memory Controller (MC)
– Embedded Flash Controller, Abort Status and Misalignment Detection
– Memory Protection Unit
!
Reset Controller (RSTC)
– Based on Three Power-on Reset Cells
– Provides External Reset Signal Shaping and Reset Sources Status
!
Clock Generator (CKGR)
– Low-power RC Oscillator, 3 to 20 MHz On-chip Oscillator and One PLL
!
Power Management Controller (PMC)
– Power Optimization Capabilities, including Slow Clock Mode (Down to 500
Hz), Idle Mode, Standby Mode and Backup Mode
– Four Programmable External Clock Signals
!
Advanced Interrupt Controller (AIC)
– Individually Maskable, Eight-level Priority, Vectored Interrupt Sources