Atmel AT91SAM7A3-EK, Руководство пользователя

Страница: 13 / 26

Board Description
AT91SAM7A3-EK Evaluation Board User Guide 3-5
6165C–ATARM–26-Jun-06
3.3 Memory
!
256 Kbytes of Internal High-speed Flash
!
32 Kbytes of Internal High-speed SRAM
!
Atmel serial DataFlash
3.4 Clock Circuitry
!
18.432 MHz standard crystal for the embedded oscillator
!
32 KHz internal RC oscillator
3.5 Reset Circuitry !
Internal reset controller with a bi-directional reset pin
!
External reset pushbutton
3.6 Shutdown
Controller !
Programmable shutdown and Wake-Up
!
Force Wake-Up and Wake-up pushbutton
3.7 Power Supply
Circuitry
!
USB powered, the dynamic power consumption on VDD1V8 is less than 50 mA at full
speed when running out of the Flash. The total current at power-up is less than 100
mA.
!
External power can be applied via USB Power adapter 5V 0.5A with USB A/B cable
!
On-chip embedded VDDCORE 1.8V regulator
!
On-board 3.3V linear regulator with shutdown control
3.8 Remote
Communication !
One Serial interface (DBGU COM Port) via RS-232 DB9 male socket
!
USB V2.0 Full-speed compliant, 12 Mbits per second (UDP)
!
Two CAN 2.0B communication ports via the 3-position printed circuit terminal block
!
One LIN communication port via the 3-position printed circuit terminal block
3.9 Analog Interface !
One selectable 0.2% 3.00V Vref or 3.3V ANA
!
One 3-position printed circuit terminal block
!
Two analog up to Vref inputs. One external user input and one back-looped with
buffered PWM0 output.
!
One buffered PWM0 analog output (up to Vref)
3.10 User Interface !
One 5-way joystick (4 directions and push for confirmation)
!
Four general-purpose buffered green LEDs (PWM controlled)