Atmel AT91SAM-ICE Скачать руководство пользователя | Manualshive

Страница: 26 / 27

background image

Headquarters

International

Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600

Atmel Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369

Atmel Europe
Le Krebs
8, Rue Jean-Pierre Timbaud
BP 309
78054 Saint-Quentin-en-
Yvelines Cedex
France
Tel: (33) 1-30-60-70-00
Fax: (33) 1-30-60-71-11

Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581

Product Contact

Web Site

www.atmel.com
www .atmel.com/AT91SAM

Technical Support

A T91SAM Support
A tmel techincal support

Sales Contacts

www.atmel.com/contacts/

Literature Requests
www.atmel.com/literature

Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI-
TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN-
TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF
THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.

© 2008 Atmel Corporation. All rights reserved. Atmel®, logo and combinations thereof and others are registered trademarks or trademarks of
Atmel Corporation or its subsidiaries. Windows® and others are registered trademark or trademarks of Microsoft Corporation in the US and/or
other countries.. ARM®, the ARMPowered® logo and others are the registered trademarks, or trademarks of ARM Ltd. Other terms and product

6206B–ATARM–04-Mar-08

«
...
24
25
26
27
»

Содержание AT91SAM-ICE




























Отзывы:

Нет отзывов

Похожие инструкции для AT91SAM-ICE

Бренд: Ebyte Страницы: 14

InterReach Fusion ADCP-77-044

Бренд: TE Connectivity Страницы: 236

Бренд: ZALMAN Страницы: 7

Power System H924

Бренд: IBM Страницы: 48

Бренд: AMD Страницы: 45

UniFi WiFi BaseStation XG

Бренд: Ubiquiti Страницы: 19

Emotron OSTO 100

Бренд: CG Страницы: 112

Бренд: Advantech Страницы: 66

Бренд: CopperOptics Страницы: 12

Бренд: Stepper Motor Canada Страницы: 5

LinkStation 500

Бренд: Buffalo Страницы: 139

Kontron CP3005 Series

Бренд: S&T Страницы: 115

Braswell Series

Бренд: Intel Страницы: 54

EZ-KIT LITE ADSP-2191

Бренд: Analog Devices Страницы: 98

MultiModem ISIHP-2S

Бренд: Multitech Страницы: 155

Бренд: Jäger Страницы: 54

Бренд: Ezviz Страницы: 38

EISBLOCK AURORA ACRYL GPX-N RTX 3070 VENTUS INCL

Бренд: Alphacool Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды